Category : product
Category : how to
1. Via ezManager
Available Products
* CSE-M32 / M53 / M73 / H20 / H21 / H25 / H53 / H55 / T16 / T32
* CSW-H85 / H80 / M83 / M85
* CIE-M10 / H10 / H12 / H14
Run ezManager, and click [Search All] button in the window.
When ezTCP is searched, select the corresponding MAC address displayed on the [Search Result].
And then, click [Status] button to see "Status" window.
You can confirm the firmware version like the below image.
2. Via ezConfig
Available Products
* EZL-50L / 50M / 70 / 200L / 200F / 80 / 80C / 90 / 300L / 300S
Run ezConfig, and click [Search All] button in the window.
When ezTCP is searched, select the corresponding MAC address displayed on the [Search Result].
And then, click [Status] button to see "Status" window.
You can confirm the firmware version like the below image.
3. Via ezConfigMP
Available Products
* EZL-400S / 410
Run ezConfigMP, and click [Search EZL-400 Series] button in the window.
When ezTCP is searched, select corresponding MAC address displayed on the [Search List] window and click [Read] button.
Then the main configuration window of ezConfigMP is appeared.
And then, click [Status] button to see "Status" window.
You can confirm the firmware version like below image.
4. Via ezSerialConfig
Available Products
* EZL-80 / 80c / 90 / 300L / 300S
Run ezSerialConfig, and click [Open] and [Read] button in order.
Then, you can see the version of firmware on the top of the left.
See the below image.
5. Via ezConfigIO
Available Products
* EZI-10
Run ezConfigIO, and click [Search All] button in the window.
When ezTCP is searched, select corresponding MAC address displayed on the [Search Result] window and click [Read] button.
Then the main configuration window of ezConfigIO is appeared.
And then, click [Status] button to see "Status" window.
You can confirm the firmware version like below image.
6. Telnet(Console) Command
Available Products
* EZL-200F / 300S / 410 / 400S
Input "env ver" command in console mode or after telnet login. Then you can confirm the firmware version.
7. AT Command : "ati3"
Available Products
* All products which support ATC mode
Input "ati3" AT command in AT command(ATC) mode. Then you can confirm the firmware version.
8. Specific Command for ezTCP/PPP Produt Line
Available Products
* EZP-250 / EZU-100 / CSP-H50
Input "!pi"(product information) command. Then you can confirm the firmware version.
See also
Related Products
[ Ethernet-Module ] CSE-M53, CSE-M32, EZL-50L, EZL-50M, EZL-410
[ Ethernet-Module with RJ45 ] CSE-M73, EZL-70
[ Ethernet-Board ] EZL-60L, EZL-60M, CSE-B63
[ Ethernet-External ] CSE-H55, CSE-H53, CSE-H25, CSE-H20, CSE-H21, EZL-200L, EZL-200F, EZL-400S
[ Wireless-External ] EZL-300S, CSW-H80
[ Wireless-Module ] CSW-M83
[ PPP ] EZP-250, EZU-100, CSP-H50, EZP-EVB, EZU-EVB
[ I/O ] EZI-10, CIE-H10, CIE-M10
