한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1553 Re: Mr. 2017-12-22

Hello, Andrejus

Firstly, please try using RS232 cable directly, and check if firmware upgrade operates without CSW-H85.

Usually CSW-H85 is not for updating firmware.
So I assume that if you try above, and don't work then it will be the same with CSW-H85.

Thank you very much.
Best Regards

> Andrejus wrote:
> ------------------------------------
> Hello,
>
> We purchased your Wireless Com port adapter CSW-H85
> And we are facing problems using this device properly.
>
> We use device in TCP Server mode, connected to our Wifi router.
> On PC We have latest 5.0 driver installed, Com port configured
> to use Telnet configuration & status synchronization.
>
> When reading some basic things from devices - it works as expected.
> But trying to make some more serious stuff like upgrading firmware (i mean of our device firmware) via your adapter - it allways fails with time-out errors.
>
> We tried changing all the settings via ezManager, but still this device
> fails to fully replicate real RS-232. Unfortunatelly. Has big delays
> and our software is unable to normally operate.
>

Writer Sollae Systems Company