한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 222 Re: Re: ezl80c direct connection with pc 2006-05-10

There are two kinds of wireless LAN network.
one is infrastructure, which requires AP(Access Point).
AP connect ethernet to wireless LAN devices, and wireless LAN devices to wireless LAN devices.

The other is ad-hoc, which doesn't requires any AP.


If you make ad-hoc network, you don't require AP, so you can connect PC with wireless LAN card to EZL-80c.
To use ad-hoc network, PC side should set as ad-hoc and EZL-80c should be ad-hoc mode.

For ad-hoc mode EZL-80c, refer to the below:
http://www.eztcp.com/documents/application/an_wlan_setting_en.pdf

> Mathieu wrote:
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> I wanted to ask whether it were possible to directly connect a PC and EZL-80c via wifi, without hub.
> Thank you in advance.
> Mathieu
> > Sollae Systems wrote:
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > To interface EZL-80c to PC via serial, a level converter(for example: MAX3232) required to convert TTL level(3.3V) to RS232.
> >
> > > Mathieu wrote:
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > Hello,
> > > It is possible to connect directly a module ezl80c with a PC having a connection wifi.
> > > Thank you in advance.'>http://www.eztcp.com/Support/an/an-wlan-001-en.pdf

> Mathieu wrote:
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> I wanted to ask whether it were possible to directly connect a PC and EZL-80c via wifi, without hub.
> Thank you in advance.
> Mathieu
> > Sollae Systems wrote:
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > To interface EZL-80c to PC via serial, a level converter(for example: MAX3232) required to convert TTL level(3.3V) to RS232.
> >
> > > Mathieu wrote:
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > Hello,
> > > It is possible to connect directly a module ezl80c with a PC having a connection wifi.
> > > Thank you in advance.'>There are two kinds of wireless LAN network.
one is infrastructure, which requires AP(Access Point).
AP connect ethernet to wireless LAN devices, and wireless LAN devices to wireless LAN devices.

The other is ad-hoc, which doesn't requires any AP.


If you make ad-hoc network, you don't require AP, so you can connect PC with wireless LAN card to EZL-80c.
To use ad-hoc network, PC side should set as ad-hoc and EZL-80c should be ad-hoc mode.

For ad-hoc mode EZL-80c, refer to the below:
http://www.eztcp.com/documents/application/an_wlan_setting_en.pdf

> Mathieu wrote:
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> I wanted to ask whether it were possible to directly connect a PC and EZL-80c via wifi, without hub.
> Thank you in advance.
> Mathieu
> > Sollae Systems wrote:
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > To interface EZL-80c to PC via serial, a level converter(for example: MAX3232) required to convert TTL level(3.3V) to RS232.
> >
> > > Mathieu wrote:
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > Hello,
> > > It is possible to connect directly a module ezl80c with a PC having a connection wifi.
> > > Thank you in advance.

Writer Sollae Systems Company