bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 1277	Re: Re: Re: ezTCP Firewall	2014-06-10

Dear Pao Actually I need your network ID, NOT "subnet ID". I am sorry to my previous reply made this confuse. For example, I assumed the IP address of your local PC is 192.168.0.x (we already know the subnet mask is 255.255.255.0). Then your local network'ss network ID is "192.168.0.0". Now you can set the [Allowed IP Range] option like the below. As the above image shows, CSE-H53N only accepts connection request from "192.168.0.1 ~ 192.168.0.255" IP range. Thank you. > Pao wrote: > ------------------------------------ > Dear Andy Lee > I appreciate your support > > The subnet on my LAN is 255.255.255.0 > > Thanks > > > Sollae Systems wrote: > > ------------------------------------ > > Dear Pao > > > > This is Andy Lee with Support Team. > > > > Unfortunately, there is NO feature to set filtered IP addresses. > > But you can set the allowed IP address range. > > > > (if all peer hosts are located in your local network), depending on your local subnet ID, you may make what you want with [Allowed IP Range] option. > > > > I would like you to give me the subnet ID of your local network, then I will give you the tip for your request. > > > > Thank you. > > > > Any Lee (swlee@ezTCP.com) > > > > > Pao wrote: > > > ------------------------------------ > > > Hi, i need to filter more of one IP address, for example: > > > > > > 10.11.12.50 > > > 192.168.1.50 > > > > > > Is this posible? > > > > > > I'sm using CSE-H53N, firmware 1.0E, ezTCP Manager v3.2E > > > > > > Thanks in advance

Writer	Sollae Systems	Company