한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1356 Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: How i can get content html thought cse-h53n 2015-07-31

Hello.

I am sorry.

Unfortunatly, We have no function to send data block by block from product to serial device.

How about using functions of HTTP protocol? (e.g. Range)

And please set baudrate to higher for fast speed.

Thank you.


> Anonymous wrote:
> ------------------------------------
>
> Hello Sollae
>
> Now I can put data as http content from my device to host thought Cse-h53n
> but if Response data has received from host more than 1Mb that send back response data to my device thought R232c(Cse-h53n connected) is very slowly
> and I don'st know how long i can receive full data!
> Maybe buffer tranfer between R232c is overload to receive large data(> 1Mb).
> Question:
> CSE-H53n i can set something to send data from CSE-H53n to my device by block by block thought R232c
>
> Thanks for relay
>
>
> > Sollae Systems wrote:
> > ------------------------------------
> > Hi.
> >
> > CSE-H53N is cannot link two network devices such as a switching hub.
> > It is just a serial to TCP or UDP data converter.
> > That means it cannot process anything sent and received via lower layers than transport layer.
> > Thus, you cannot use network applications including PING tester and web browser to access to the host through CSE-H53N.
> > Please note that the connection between your device and CSE-H53N should be SERIAL instead of NETWORK.
> >
> > Could you try to use a serial application on your Linux machine?
> >
> > Thanks.
> >
> > > Anonymous wrote:
> > > ------------------------------------
> > >
> > > Hello Sollae!
> > >
> > > When i call url from device to host, i was recieved "fail to connect server" and "connect timeout" message.
> > >
> > > i was checkked status of CSE-H53N and Host properly, it is always "Established" and STS led(on).
> > >
> > > my device(192.168.1.1) -RS-232-> CSE-H53N(192.168.1.2) -LAN(Established)->HOST(192.168.1.3)
> > >
> > > Can I ping from device to host? if device could not ping to host that mean i can not call a url to host by http protocol was implemented.
> > >
> > > Thanks for regards
> > >
> > >
> > >
> > > > Sollae Systems wrote:
> > > > ------------------------------------
> > > > Hello.
> > > >
> > > > Please make network CSE-H53N and Host properly.
> > > >
> > > > Ping test must be successful.
> > > >
> > > > If it is failed, TCP connection also will be failed.
> > > >
> > > > And where does "fail to connect server" message come from?
> > > >
> > > > I think it is not from CSE-H53N.
> > > >
> > > > and if network is fine, please check STS led(on) and [STATUS] of ezManager.
> > > >
> > > > TCP state will be "Established" not "SYN_SENT".
> > > >
> > > > if state is syn_sent(trying to connect to the host), your sever is not ready.
> > > >
> > > > then please check your server.
> > > >
> > > > Here is a FAQ.
> > > > ezTCP does not work! (Checklist)
> > > >
> > > > please refer [2. Fail in TCP connection].
> > > >
> > > > Thank you.
> > > >
> > > >
> > > >
> > > >
> > > > > Anonymous wrote:
> > > > > ------------------------------------
> > > > >
> > > > > Good mornning Sollae!
> > > > >
> > > > > I have created the enviroment and implement http protocol on my device as same your image. But when i sent request from device to host thought cse-h53n, Error: "fail to connect server" was generated. I think device can not ping to host.
> > > > > I dont understand how to device could connect to host thought cse-H53n if i has implemented http protocol on the device.
> > > > >
> > > > > Thanks for regards
> > > > >
> > > > > > Sollae Systems wrote:
> > > > > > ------------------------------------
> > > > > > Hello again.
> > > > > >
> > > > > > If Host is not using a socket program, please set it like this for the connection.
> > > > > >
> > > > > > [CSE-H53N]
> > > > > > Client
> > > > > > IP address: 192.168.1.2
> > > > > > Peer IP address: 192.168.1.3 (server IP)
> > > > > > Peer port: 80 (server port)
> > > > > >
> > > > > > [Host]
> > > > > > Server
> > > > > > IP address: 192.168.1.3
> > > > > > Local port: 80
> > > > > >
> > > > > > If TCP connection is established, STS LED of CSE-H53N will be on.
> > > > > > After that, You can send data from RS232 to LAN and vice versa.
> > > > > >
> > > > > > Here is an example, refer to this image.
> > > > > >
> > > > > >
> > > > > >
> > > > > > As I said before, you have to implement HTTP protocol like (②) and send it from your device. I am sorry but we can not support it.
> > > > > >
> > > > > > Implementing HTTP
> > > > > >
> > > > > > For the detailed information, refer to the RFC2616.
> > > > > >
> > > > > > Thank you.
> > > > > >
> > > > > >
> > > > > >
> > > > > > > Anonymous wrote:
> > > > > > > ------------------------------------
> > > > > > >
> > > > > > > Hi Sollae Systems!
> > > > > > >
> > > > > > > Thanks for regards!
> > > > > > >
> > > > > > > I dont understand know how to send a data from (user device) with rs-232 to Host(web server) thought cse-H53n and after host could response a data to user device.
> > > > > > > Do you give me something a example to connect it?
> > > > > > >
> > > > > > > Thanks so much
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > Sollae Systems wrote:
> > > > > > > > ------------------------------------
> > > > > > > > Hello.
> > > > > > > >
> > > > > > > > If your device has LAN port, you can connect to host directly without CSE-H53N.
> > > > > > > >
> > > > > > > > But If you want to use RS232 port, TCP connection is needed between CSE-H53N and host.
> > > > > > > >
> > > > > > > > Here are Examples.
> > > > > > > >
> > > > > > > > 1.
> > > > > > > >
> > > > > > > > [CSE-H53N]
> > > > > > > > Server
> > > > > > > > IP address: 192.168.1.2
> > > > > > > > Local port: 1470
> > > > > > > >
> > > > > > > > [Host with socket program]
> > > > > > > > Client
> > > > > > > > IP address: 192.168.1.3
> > > > > > > > Peer IP address: 192.168.1.2 (server IP)
> > > > > > > > Peer port: 1470 (server port)
> > > > > > > >
> > > > > > > > 2.
> > > > > > > >
> > > > > > > > [CSE-H53N]
> > > > > > > > Client
> > > > > > > > IP address: 192.168.1.2
> > > > > > > > Peer IP address: 192.168.1.3 (server IP)
> > > > > > > > Peer port: 1470 (server port)
> > > > > > > >
> > > > > > > > [Host with socket program]
> > > > > > > > Server
> > > > > > > > IP address: 192.168.1.3
> > > > > > > > Local port: 1470
> > > > > > > >
> > > > > > > >
> > > > > > > > If TCP connection is established, STS LED of CSE-H53N will be on.
> > > > > > > >
> > > > > > > > After that, You can send data from RS232 to LAN and vice versa.
> > > > > > > >
> > > > > > > > Thank you.
> > > > > > > >
> > > > > > > >
> > > > > > > > > Anonymous wrote:
> > > > > > > > > ------------------------------------
> > > > > > > > >
> > > > > > > > > Hello Sollae
> > > > > > > > >
> > > > > > > > > Thanks you so much for relay
> > > > > > > > >
> > > > > > > > > My device is a network device but only
> > > > > > > > > two communication port: LAN, RS-232c
> > > > > > > > > LAN has connect to router
> > > > > > > > > RS-232c: i use CSE-h53n to connect HOST
> > > > > > > > > This is my problem and Im trying connect RS-232c to HOST...(T_T)
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Thanks
> > > > > > > > >
> > > > > > > > > > Sollae Systems wrote:
> > > > > > > > > > ------------------------------------
> > > > > > > > > > Hello.
> > > > > > > > > >
> > > > > > > > > > CSE-H53N is just a serial to ethernet converter.
> > > > > > > > > >
> > > > > > > > > > I am not sure why you use CSE-H53N even if your device is a network device.
> > > > > > > > > >
> > > > > > > > > > If the Host sends HTTP protocol, CSE-H53N bypass to RS232 port.
> > > > > > > > > >
> > > > > > > > > > Then serial port of your device can receive data.
> > > > > > > > > >
> > > > > > > > > > So you should implements about HTTP protocol to send to the host.
> > > > > > > > > >
> > > > > > > > > > We do not have any examples.
> > > > > > > > > >
> > > > > > > > > > So I am sorry we can not support to get url files.
> > > > > > > > > >
> > > > > > > > > > You can find an application note about HTTP protocol at our hompage.
> > > > > > > > > >
> > > > > > > > > > Implementing HTTP
> > > > > > > > > >
> > > > > > > > > > For the detailed information, refer to the RFC2616.
> > > > > > > > > >
> > > > > > > > > > I hope It will be helpful.
> > > > > > > > > >
> > > > > > > > > > Thank you.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > Anonymous wrote:
> > > > > > > > > > > ------------------------------------
> > > > > > > > > > > Hello Sollae!
> > > > > > > > > > >
> > > > > > > > > > > I have a example:
> > > > > > > > > > > My device:
> > > > > > > > > > > OS: linux
> > > > > > > > > > > IP: 192.168.1.1
> > > > > > > > > > > CSE-H53n:
> > > > > > > > > > > IP: 192.168.1.2
> > > > > > > > > > > TCP Server port is 80
> > > > > > > > > > > HOST:
> > > > > > > > > > > OS: linux
> > > > > > > > > > > IP: 192.168.1.3
> > > > > > > > > > > url get file: http://192.168.1.3/download.pdf
> > > > > > > > > > >
> > > > > > > > > > > above My device how to bypass data to call url form host thought CSE-H53n
> > > > > > > > > > >
> > > > > > > > > > > Can you give me a example for do that!
> > > > > > > > > > >
> > > > > > > > > > > Thanks for regards
> > > > > > > > > > >
> > > > > > > > > > > > Sollae Systems wrote:
> > > > > > > > > > > > ------------------------------------
> > > > > > > > > > > > Hello.
> > > > > > > > > > > >
> > > > > > > > > > > > This is a technical support team of Sollae Systems.
> > > > > > > > > > > >
> > > > > > > > > > > > I think you want to communicate each other through HTTP protocol.
> > > > > > > > > > > >
> > > > > > > > > > > > But CSE-H53N(or all of ezTCP) supported only TCP/IP protocol.
> > > > > > > > > > > >
> > > > > > > > > > > > HTTP is the Application layer.
> > > > > > > > > > > >
> > > > > > > > > > > > CSE-H53N does not care about an application layer.
> > > > > > > > > > > >
> > > > > > > > > > > > It just bypass all data from serial device to the host.
> > > > > > > > > > > >
> > > > > > > > > > > > So, after TCP connection between CSE-H53N and a host, you can send what you implement protocol to the host and vice versa.
> > > > > > > > > > > >
> > > > > > > > > > > > Have a nice day.
> > > > > > > > > > > >
> > > > > > > > > > > > Thank you.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > Khanh wrote:
> > > > > > > > > > > > > ------------------------------------
> > > > > > > > > > > > > Current i have a problem with get content html
> > > > > > > > > > > > >
> > > > > > > > > > > > > This is my environment
> > > > > > > > > > > > >
> > > > > > > > > > > > > Device(supported web server) -> cse-h53n -> HOST(web server)
> > > > > > > > > > > > >
> > > > > > > > > > > > > Device connect to cse-h53n by serial rs-232c
> > > > > > > > > > > > > HOST connect to cse-h53n by LAN
> > > > > > > > > > > > >
> > > > > > > > > > > > > Question: I can call a url from Device to HOST thought cse-h53n and get result is html content from HOST?
> > > > > > > > > > > > >
> > > > > > > > > > > > > how i can setting on cse-h53n
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >

Writer Sollae Systems Company