한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1412 Re: Re: Re: Re: Re: Re: Re: How o setup CSW-H80 2016-06-28

> Anonymous wrote:
> ------------------------------------
> > Sollae Systems wrote:
> > ------------------------------------
> > > Anonymous wrote:
> > > ------------------------------------
> > > > Sollae Systems wrote:
> > > > ------------------------------------
> > > > > George wrote:
> > > > > ------------------------------------
> > > > > > Sollae Systems wrote:
> > > > > > ------------------------------------
> > > > > > > George wrote:
> > > > > > > ------------------------------------
> > > > > > > Hello guys,
> > > > > > >
> > > > > > > my boss just bought CSW-H80 and I need to configure it. Our network is pretty simple.
> > > > > > > Couple of computers connected to WLAN - 10.113.2.0/24, SSID VOKAP. I need all my computers to communicate with CNC device which is connected with CSW-H80. I have no idea how to configure CSW-H80 device to communicate with another computers in my network.
> > > > > > > The goal is to send some "file" to CNC device from any computer in my network.
> > > > > > >
> > > > > > > Thank you very much!
> > > > > > >
> > > > > >
> > > > > > Thank you for using our product.
> > > > > >
> > > > > > Please refer to the attached document.
> > > > > >
> > > > > > Ff you need any further information, please feel free to contact me
> > > > > >
> > > > >
> > > > > Hello, thank you very much
> > > > >
> > > > > Now I´m able to ping all computers in my network but still not able to connect to AP with IP address only with RS 232.
> > > > > I have set up static IP address from IP range of my WLAN.
> > > >
> > > >
> > > >
> > > > Please make sure that you setup correctly the following parameters:
> > > > -SSID
> > > > -Encryption
> > > > -Authentication
> > > > -Encryption
> > > > -WPA Key
> > > >
> > > > If the above parameters is setup correctly, please refer to
> > > > -Section 8.1 (page 58) and 8.2 (page 59) of User Manual http://www.eztcp.com/documents/manual/cswh80en.pdf
> > > > -http://www.eztcp.com/en/support/view.php?page=1&cid=175
> > > >
> > > > If the problem doesn't still be solved, could you please send us snapshot of all setting on ezManager and also describe LED status on CSW-H80? This help us find out reason quickly.
> > >
> > > ello,
> > >
> > > I quess problem is wifi authentication...if I setup WLAN to WEP there is no problem but if I setup WLAN back to WPA2 PSK AES device is no longer able to connect to WLAN.
> > > SSID, key etc is set up correctly. Do I need to upgrade firmware? Currently have 2.0A version...is newer version out?
> > >
> > > Thank you very much
> > >
> > > Regards
> > >
> > > G.
> >
> > Good morning,
> >
> > Firmware 2.0 is the latest version and works stably.
> >
> > The configuration must be the same between Access Point and CSW-H80.
> >
> > Could you please send us the configuration parameters on both AP and CSW-H80 (except for SSID)?
>
> Hello, here is setting of both devices:
>
> CSW-H80
> SSID VOKQUEST
> Authenticatio: WPA2 PSK
> Encryption: AES
> IP address is obtained automatically
>
> AP settings is pretty much same
> subnet 10.1.130.0/24

Thank you very much for your cooperation.

Sorry we have not found out reason why CSW0H80 can't connect to your AP.

Could you please send us AP model name and firmware version, then we can test this symptom by ourselves after buying this AP.

Once finishing the test, we will inform you.

Thank you again!

Writer Sollae Systems Company