한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1411 Re: Re: Re: Re: Re: Re: How o setup CSW-H80 2016-06-27

> Sollae Systems wrote:
> ------------------------------------
> > Anonymous wrote:
> > ------------------------------------
> > > Sollae Systems wrote:
> > > ------------------------------------
> > > > George wrote:
> > > > ------------------------------------
> > > > > Sollae Systems wrote:
> > > > > ------------------------------------
> > > > > > George wrote:
> > > > > > ------------------------------------
> > > > > > Hello guys,
> > > > > >
> > > > > > my boss just bought CSW-H80 and I need to configure it. Our network is pretty simple.
> > > > > > Couple of computers connected to WLAN - 10.113.2.0/24, SSID VOKAP. I need all my computers to communicate with CNC device which is connected with CSW-H80. I have no idea how to configure CSW-H80 device to communicate with another computers in my network.
> > > > > > The goal is to send some "file" to CNC device from any computer in my network.
> > > > > >
> > > > > > Thank you very much!
> > > > > >
> > > > >
> > > > > Thank you for using our product.
> > > > >
> > > > > Please refer to the attached document.
> > > > >
> > > > > Ff you need any further information, please feel free to contact me
> > > > >
> > > >
> > > > Hello, thank you very much
> > > >
> > > > Now I´m able to ping all computers in my network but still not able to connect to AP with IP address only with RS 232.
> > > > I have set up static IP address from IP range of my WLAN.
> > >
> > >
> > >
> > > Please make sure that you setup correctly the following parameters:
> > > -SSID
> > > -Encryption
> > > -Authentication
> > > -Encryption
> > > -WPA Key
> > >
> > > If the above parameters is setup correctly, please refer to
> > > -Section 8.1 (page 58) and 8.2 (page 59) of User Manual http://www.eztcp.com/documents/manual/cswh80en.pdf
> > > -http://www.eztcp.com/en/support/view.php?page=1&cid=175
> > >
> > > If the problem doesn't still be solved, could you please send us snapshot of all setting on ezManager and also describe LED status on CSW-H80? This help us find out reason quickly.
> >
> > ello,
> >
> > I quess problem is wifi authentication...if I setup WLAN to WEP there is no problem but if I setup WLAN back to WPA2 PSK AES device is no longer able to connect to WLAN.
> > SSID, key etc is set up correctly. Do I need to upgrade firmware? Currently have 2.0A version...is newer version out?
> >
> > Thank you very much
> >
> > Regards
> >
> > G.
>
> Good morning,
>
> Firmware 2.0 is the latest version and works stably.
>
> The configuration must be the same between Access Point and CSW-H80.
>
> Could you please send us the configuration parameters on both AP and CSW-H80 (except for SSID)?

Hello, here is setting of both devices:

CSW-H80
SSID VOKQUEST
Authenticatio: WPA2 PSK
Encryption: AES
IP address is obtained automatically

AP settings is pretty much same
subnet 10.1.130.0/24

Writer Anonymous Company