한국어 English Chinese Russian
Support

Q&A



Your information is protected by SSL.
No. 1451 Re: Re: Re: Re: Re: Read Html CIE-M10 2016-12-27


Hello


To enable HTTP server on CIE-M10:
- Connect CIE-M10 to your network (see section 2.1 Installation of User Manual)
- Run ezManager, go to "MAC" tab, click "Search All" button, MAC and IP address of CIE-M10 should be shown, if not, check your network connection.
- Click on MAC address of CIE-M10, all setting information of CIE-M10 will be shown (See Figure 2-3 of User Manual).
- Goto "I/O port" tab => "Basic Setting" you will see the window (see the attached file). Check on "Web(HTTP)" checkbox to enable HTTP server
- Click "Write" button to save configuration.

If you cann't still connect to webpage, please save configutation file and send us.

To save configuration file, go to "Advanced Menu" on ezManager => "Export Variables"



> sotiro wrote:
> ------------------------------------
> Excuse me , probably you didn't see the complete previous message :
>
> The problem is that the option "web(http)" is not enable....
>
> All the best and whishes for a beautifull New Year
>
>
> > Sollae Systems wrote:
> > ------------------------------------
> >
> > You're welcome!
> >
> > > Sotiropoulos wrote:
> > > ------------------------------------
> > > Thank you for your fast answer.
> > >
> > > The problem is that the option "web(http)" is not enable....
> > >
> > > JM
> > >
> > >
> > >
> > >
> > > > Sollae Systems wrote:
> > > > ------------------------------------
> > > >
> > > > Thank you for using our products.
> > > >
> > > > To connect to the html page , please make sure that:
> > > >
> > > > - "Web(HTTP)" option is enable via ezManager (refer to page 47 of User Manual)
> > > > - HTTP port on web browser is the same as configed port on CIE-M10 (refer to page 32 of User Manual)
> > > >
> > > > To change webpage, please make sure the following conditions:
> > > > - CIE-M10 needs to be entered to ISP mode (refer to page 24 of User Manual)
> > > > - "Web(HTTP)" option is enable via ezManager (refer to page 47 of User Manual)
> > > > - Total size of your web contents(HTML files, Image files) should be lower than allowed size (80KB or 96KB, depending on your setting)
> > > > Note that each time you change web contents, all of old file will be deleted. Therefore, upload all web contents at one time (send multiple file).
> > > >
> > > > If the problem doesn't still be solved, please feel free to contact us.
> > > >
> > > > Thank you,
> > > >
> > > >
> > > > > Sotiro wrote:
> > > > > ------------------------------------
> > > > > Dear,
> > > > >
> > > > > I try to use a CIE-M10 module (last or older firmware, same result).
> > > > > First : Impossible to connect to the html page
> > > > > Second : Impossible to change this page if I select "changeF/W"
> > > > >
> > > > > Note : the ping on the IP of the module is OK
> > > > >
> > > > > Is there a way???
> > > > > All the best

Attachment 20161227_Capture.PNG
Writer Sollae Systems Company