한국어 English Chinese Russian
Support

Q&A



Your information is protected by SSL.
No. 1668 Re: Re: Re: Re: Communication to a CSE-M53N using controllogix PLC 2019-05-15


Hello,

Thank you, we will try do just that.

And the current architecture we want to make it work is:

PLC <---Ethernet/IP---> CSE-M53N

Which we suspect is not going to work.


> Sollae Systems wrote:
> ------------------------------------
> Dear Joaquin Juarez,
>
> Thank you for your information
>
> I am not clear about your network architecture.
>
> If i am correct, it should be:
> PLC <----Serial-----> CSE-M53N <-----TCP/IP-----> PC (----TCP/IP---> ezVSP <----Virtual Serial---> OPC Server )
>
> If so, you need to establish TCP connection between ezVSP and CSE-M53N.
> Could you please send us the configuration of TCP connection on ezVSP?
>
> If possible, we can do a remote support via a remote software, which is similar to TeamViewer.
> If possible, please contact us via email support@eztcp.com. Our working time is from 9:00AM to 6:00PM (GMT+9)
>
>
>
>
> > Joaquin Juarez wrote:
> > ------------------------------------
> >
> > Hello,
> >
> > Thank you for your fast response.
> >
> > My goal is to see if I can communicate directly to the module using a PLC.
> >
> > -Architecture:
> > Network Card 1756-EN2T (Ethernet/IP) connected to the CSE-M53N (Through a switch).
> > System does not have a serial port.
> >
> > -Find the settings in the attached PDF.
> >
> > -I do not use any PC to transfer the data. I would be looking to do it with the PC.
> >
> > Now I might be jumping ahead, but in case my approach is wrong, would I need to do something like the following?:
> > PLC --> PC (Running OPC Server and ezVSP) --> CSE-M53N
> >
> > Best regards
> > Joaquin Juarez
> >
> > > Sollae Systems wrote:
> > > ------------------------------------
> > > Hello Joaquin Juarez,
> > >
> > > Thank you for using our product.
> > >
> > > In order to find out the issue, could you please describe detail about:
> > > - Your system architecture
> > > - Setting of Serial Device
> > > - Setting on CSE-M53 (network and serial setting)
> > > - Which software do you use on PC to transfer data
> > > ?
> > >
> > > Thank you,
> > > Best regards,
> > >
> > >
> > > > Joaquin Juarez wrote:
> > > > ------------------------------------
> > > > Hello,
> > > >
> > > > I have a Display that makes use of the CSE-M53N, connected to a local network over ethernet.
> > > >
> > > > I have not been able to connect the PLC to this communication module. I am wondering if you have any prior example I could use.
> > > >
> > > > Best Regards

Writer Joaquin Juarez Company Callisto Integration