한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1666 Re: Re: Communication to a CSE-M53N using controllogix PLC 2019-05-15


Hello,

Thank you for your fast response.

My goal is to see if I can communicate directly to the module using a PLC.

-Architecture:
Network Card 1756-EN2T (Ethernet/IP) connected to the CSE-M53N (Through a switch).
System does not have a serial port.

-Find the settings in the attached PDF.

-I do not use any PC to transfer the data. I would be looking to do it with the PC.

Now I might be jumping ahead, but in case my approach is wrong, would I need to do something like the following?:
PLC --> PC (Running OPC Server and ezVSP) --> CSE-M53N

Best regards
Joaquin Juarez

> Sollae Systems wrote:
> ------------------------------------
> Hello Joaquin Juarez,
>
> Thank you for using our product.
>
> In order to find out the issue, could you please describe detail about:
> - Your system architecture
> - Setting of Serial Device
> - Setting on CSE-M53 (network and serial setting)
> - Which software do you use on PC to transfer data
> ?
>
> Thank you,
> Best regards,
>
>
> > Joaquin Juarez wrote:
> > ------------------------------------
> > Hello,
> >
> > I have a Display that makes use of the CSE-M53N, connected to a local network over ethernet.
> >
> > I have not been able to connect the PLC to this communication module. I am wondering if you have any prior example I could use.
> >
> > Best Regards

Attachment 20190515_COnfig.zip
Writer Joaquin Juarez Company Callisto Integration