한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 38 Re: How do i use the ezl-80c? 2005-07-11

To test the passive connection, do as following example:

[EZL-80c]
Local IP Address: 10.1.0.1
Subnet Mask: 255.0.0.0

[Host(PC)]
Local IP Address: 10.1.0.2
Subnet Mask: 255.0.0.0

[Example]
at+plp=1470[CR] ---------to EZL-80c's serial port---------
OK[CR][LF] ---------From EZL-80c's serial port---------
ata[CR] ---------to EZL-80c's serial port---------

(EZL-80c listen TCP connection from port 1470)

(There is a connection from the Host(PC).)
(telnet 10.1.0.1 1470 in the command prompt)

CONNECT[CR][LF] ---------now TCP connection is established---------

(bidirectional communcation)




> jason wrote:
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> I wanna to use the EZL-80C.It has four differents mode.I will use the ATC mode.
> the ATC mode has active connection and passive connection.How can i use the passive connection.
> why doesn't the transmission data "ata" connect ?

Writer Sollae Systems Company