한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 446 Re: Re: Re: Re: Problem Disconnect EZL-80c 2008-01-17

... but in my project, there is always a dialog.
All the 100ms, i have 8 bytes which are send through ezl-80c.So i don't understand why the CF card is reset ?
I have check the quality of the signal ("excellent"), the power of the supply ("OK") and for my test, the PC and the ezl-80c are very close.

Thanks.

> Sollae Systems wrote:
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> EZL-80c resets the CF card if there's no data from the CF card for 30 seconds.
> The reason why that if CF card operates badly, EZL-80c reset the CF card immediately.
> You can't turn off the function.
>
> If you communicate every less than 30 seconds, it doesn't matter.
>
> > Greg wrote:
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > The led of wireless card turn OFF 1 sec, blink 1 time and turn ON... and connection wifi is OK.
> >
> > How to disable this "reset" about which you speak.
> > What it makes exactly and why ??
> >
> > Thanks.
> >
> >
> > > Sollae Systems wrote:
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > When EZL-80c doesn't communicate for 30 seconds,
> > > it reset the wireless LAN card.
> > > Please check the duration the LED blinking.
> > >
> > > > Greg wrote:
> > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > Hello,
> > > >
> > > > I use the module on a RS485 connection. On this connection, there is always a communication. All work correctly, I record well bytes by pc but often the ezl-80c disconnect for few seconds (1 or 2 sec) and i loose few bytes.
> > > > The wifi communication is Ok but i have notice that from time to time, the led on CF Card turn off few seconds (1 sec), i loose connection and immediately after turn on and connection is OK...
> > > >
> > > > My config off EZL-80c :
> > > > eztcp mode : t2s
> > > > wlan Mode : ad-hoc
> > > >
> > > > Have you any idea to resolve this disconnect ??
> > > >
> > > > Thanks.

Writer Greg Company