한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 546 Re: EZL50L 2010-01-05

Hello.

When EZL-50L is connected with Ethernet (or another network device), its LINK LED is turned on.

Surely, to search and access to EZL-50L, the LINK LED should be ON.

The problem may have chance to occur by using wrong type of Ethernet cable.

If you want to connect EZL-50L with a network HUB, you should use cross Ethernet cable. However, 1:1 (or direct) Ethernet cable should be used when you connect the EZL-50L with your PC.

You can refer to below post for information about the Ethernet cable.

Go to the post.

If I'sve missed something, please let me know.

Have a nice day!


> Alireza wrote:
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Hello and thank for your answer
> my another Ezl have problem Also.
> Status Led Is Blinking at 500ms.
> Link Led is Off;
> Rx And Tx Led Blinking together.
> Hub Identify the module But Ezconfig can not connect to module.
> please Help Me.

Writer Sollae Systems Company