bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 650	Re: Re: Re: Re: Re: AdHoc connection - EZL80c	2012-02-16

I am afraid but we can’t get the CF card in Korea. So we can’t test it. And the EZL-80c was already discontinued. So I recommend you the CSW-M85 wireless module. CSW-M85 If you are in Germany, contact the Germany distributor. The Germany distributor information is followed: ELEKTRONIKLADEN \| ELMICRO http://www.elektronikladen.de > Dane wrote: > ------------------------------------ > > No, when i restart the EZL-80c module, the net isn'st visible anymore. I have to wait a long time without power supply on it, before connection is possible again. > > I use WinXP with a Ralink RT2500 Wlan card (PC) and a D-Link DCF-660W CF-Card (EZL-80c module). > > > > > > > Sollae Systems wrote: > > ------------------------------------ > > > > Hello again. > > > > when you restart PC, SSID isn'st visible on PC? > > or when you restart EZl-80c ? > > > > if you restart PC, and using the Windows 7/vista, > > check the 'souto connection to adhoc's. > > > > if the problem is not solve, tell me your OS and WLAN chipsets. > > Have a nice day. > > Thank you. > > > > > > > > > Dane wrote: > > > ------------------------------------ > > > Thanks. > > > updating the driver solved the problem with the abortion of the connection. Unfortunately, after a restart it'ss not possible to connect again, the SSID isn'st visible either. > > > > > > > > > > > > > > > > > > > > > > > > > Sollae Systems wrote: > > > > ------------------------------------ > > > > Does 'sNet isn'st visible and the connection is aborted's mean that the SSID of EZL-80c does not connect on your PC? > > > > > > > > In this case, you have to check your PC as follows. > > > > > > > > 1. Even though all the parameters are correct, if you couldn’t get the ad-hoc link with our products, please check that your devices’ Wi-Fi adapter. > > > > Please check the link, too. > > > > http://blog.eztcp.com/ensollae/54 > > > > 2. if you test at one channel, please test at another channel. It change on ezSerialConfig. > > > > > > > > If you have another questions, feel free to contact us. > > > > Have a nice day. > > > > Thank you. > > > > > > > > > > > > > Dane wrote: > > > > > ------------------------------------ > > > > > I use a EZL-80c module and create an SSID in AdHoc Mode. > > > > > This is possible but after a few seconds, the net isn'st visible anymore and the connection is aborted. After this happend, a restart nor reset makes the network visible again and it`s not possible to establish a connection. However, after a few hours without supply the net is visible. but only for a few seconds. > > > > > i tried different settings and modes, but without success. > > > > > > > > > > can anybody help me?

Writer	Sollae Systems	Company