bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 1209	Re: Re: Problems EZL-50L with Netgear RP614 DHCP server	2013-07-15

Hi, Have solved the problem. Your reply gave me the idea that there could be something wrong with port compatibility. So I put a small switch (TP-link) in between, and now it works fine! Thank you again for your quick reply. Best regards Daniel > Sollae Systems wrote: > ------------------------------------ > Hi. > > This is technical support team of Sollae Systems. > > I am sorry but additional checking operations of the STS (status) and LINK LED is required. > > If the LINK LED is on, assigning IP address might be failed. > In this case, the STS LED will flash 4 times at once. > > If the 50L’s LINK LED is off and the module works fine with other network devices, please check the settings of Router’s port. > EZL-50L supports 10Mbit (Half Duplex) Ethernet so check if the port is set with another link speed or mode. > > If the 50L’s LINK LED is off and the module does not work with any other devices, it might need repair. > > I am sorry for your inconveniences. > > > =========================================================== > > > Daniel Tits wrote: > > ------------------------------------ > > Hi, > > > > Bought some EZL-50L boards recently to incorporate in our products (satellite earth stations). Everything works fine with PC and cross-over cable, ezConfig etc. > > > > Now I want to connect to a local network (straight cable) with Netgear RP614 Router/Gateway using DHCP. Whatever I try no way to obtain connection. Of course I have activated DHCP on EZL. But the unit does not connect, the Rx data LED remains flashing rapidly all the time. > > > > For info, all other devices, over 10, connect correctly to the RP614 with DHCP. Could you please tell me what I am doing wrong? > > > > Thank you very much in advance. > > Best regards > > Daniel

Writer	Daniel Tits	Company	Yellow Sat