한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1792 Re: Reset Ezl 70 2021-03-22


Dear Marco Montorsi,

This is Sollae Systems' Technical Support Team.

Thank you for using our products.

If your PC and EZL-70 are connected to the same network, no reset will be needed on EZL-70 to connect via ezConfig.
In that case, you can use "Search All" function. If it is not successful, please check the wiring and network infrastructure.

It is also possible to connect to EZL-70 from another network.
In that case, your PC can connect to EZL-70 via "IP address" Search function (see page 6 of ezConfig Manual).
Note that, EZL-70 must use a public IP address, or a private IP address with port forwarding.

You can also refer to this checklist: https://www.eztcp.com/en/support/view.php?page=1&cid=286

If the problem is not still solved, please feel free to contact us.

Thank you,

Best regards,


> Marco Montorsi wrote:
> ------------------------------------
> Hello,
To try to set the Ezl 70, i configured it on another network with the ip address 192.168.1.88, now connected to my pc the ezConfig doesn't find it anymore with the search all command, reading the network with wireshark, i found that the ezl70 is tryng to find the ip address of the old network's gateway, my question is if there's some way to reset the ezl 70, so the ezConfig programm will find it again, to be more clearer i leava in attachment the wireshark screenshot,
Thanks,
MM

Writer Sollae Systems Company SIG-5451