한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1493 Re: Desactivate Outputs if no connection 2017-05-15

Dear Fábio Oliveira,

The feature you asked is possible.

To configure this feature, please do the following steps:
- open our ezManager sofware and
- click "Search All" button to find CIE-H10 on your network
- click on the product name to connect ezManager to product
- do as shown on the attached image
- click save button to save the configuration

Thank you,

Best regard,


> Fábio Oliveira wrote:
> ------------------------------------
> Good afternoon,
>
> I would like to know if it is possible to configure the CIE-H10 to do the following:
>
> 1. A normal connection is made in Modbus/TCP with the module.
> 2. Some outputs are activated;
> 3. Suddenly, the cable information is disconnected or some other line issue breaks the connection between the PC program and the module.
> 4. All the outputs should be deactivated.
>
> I cannot make the module to put all outputs off when there is no connection. I can put all outputs off when I normally disconnect from the module ( I checked the box "Initialize the output port state" in the ez TCP manager).
>
> So, is there a way to make all the outputs off if the connection is abnormally lost?
>
> Thank you very much.

Attachment 20170515_Capture.PNG
Writer Sollae Systems Company