한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1826 Re: Re: Re: Re: CSE-M73 and a display module 2021-09-03

Thank you for your reply,

With the CIE-M10, can i control a touchscreen, that communicates through SPI, knowing that the display function communicate through SPI, also the touch function.
Following the touchscreen module that i want to use
https://www.waveshare.com/product/3.5inch-rpi-lcd-b.htm

Does the CIE-M10 has those ports?

Can you send me the pins map of the CIE-M10?


Thank you.
Best regards.


> Sollae Systems wrote:
> ------------------------------------
> Hello again,

Firstly, if you want to convert data and display data at the same time, you can program for P4M-400 to realize both functions.

Secondly, We would like to confirm that Serial port on CIE-M10/CIE-M10A has TTL voltage level, digital input/output has 3.3V CMOS logic level.

Best regards,


> Anonymous wrote:
> ------------------------------------
> Thank you,
I want at the same time that the module converts data from serial to Ethernet.
I have found the CIE-M10.
Please confirm that it has pin out, and if the CIE-M10 has a TTL input.
Thank you.
Best regards.


> Sollae Systems wrote:
> ------------------------------------
> Hello,

This is Sollae Systems'ss Technical Support Team.

Thank you for your interest in our products.

Regarding your question, the CSE-M73 is NOT programmable. It is only used for converting serial data to UDP/TCP and vice versa.

We would recommend you to use our programable module named P4M-400. You can program for P4M-400 using PHPoC language, which is similar to PHP. What you wish to do in your application can be done by using P4M-400. For more information about P4M-400, you can refer to: https://www.phpoc.com/p4m-400.php

I hope the above is useful to you.
Please feel free to contact me if you need any further information.


> Anonymous wrote:
> ------------------------------------
> Hello,
i would like to know if the CSE-M73 can control a display module.
in another way, is the CSE-M73 programmable, because i want to display data received via ethernet with a simple display module that will be pluged on the CSE-M73 converter.
Best regards.

Writer Anonymous Company