bannerbar

Support > Technical Support

Q&A

Your information is protected by SSL.

No. 1572	Re: Re: Re: Re: Re: Re: at+pssl	2018-03-06

Here is the output of the at-commands: at+pssl=0 OK at+pssl? 0 OK at+pssl=1 OK at+pssl? 1 OK > Sollae Systems wrote: > ------------------------------------ > Dear Marc, > > Thank you for your information. > > Could you please let us know the return value of "at+pssl?" command, after when you active/deactivate SSL using AT command. > For example, you may try sending AT commands as below and let us know the return message after each command: > > at+pssl=0[CR] > > at+pssl? [CR] > > at+pssl=1[CR] > > at+pssl?[CR] > > If it works normally, the response message should be like this: > at+pssl=0[CR] > OK > > at+pssl?[CR] > 0 > OK > > at+pssl=1[CR] > OK > > at+pssl?[CR] > 1 > OK > > The "at+pwp" command should be used if you want to write the setting to ezTCP device, so that the setting will be saved even if you reboot the product. > > Thank you very much. > Best Regards, > > > > Marc wrote: > > ------------------------------------ > > When I execute the at+pwp command it returns OK, but after this I do not get any response anymore to any at-command. > > > > When I then power-down/power-up the device. it is working with the ssl setting active. > > > > > > > > > Sollae Systems wrote: > > > ------------------------------------ > > > Dear Marc, > > > > > > The command at+pwp should be used to save the setting to the device. > > > After that, to check SSL status, you may use the command: at+pssl? > > > In case there is still a problem, could you please let us know more clearly about the situation that those AT commands do not have any effect? > > > > > > Please feel free to contact us if you have any inquiry. > > > > > > Thank you for your understanding. > > > Best Regards, > > > > > > > > > > Marc wrote: > > > > ------------------------------------ > > > > HI, > > > > > > > > Thanks for the info. It is indeed the CSE-M53N that I have. I was able to upgrade to this new firmware. > > > > > > > > Unfortunately the at+pssl does not seem to work. I get OK when I execute the command, but it does not have any effect. > > > > Is it a requirement to execute the at+pwp command afterwards. (I only want to change the ssl option temporary)? > > > > > > > > Regards, > > > > Marc > > > > > > > > > > > > > > > > > Sollae Systems wrote: > > > > > ------------------------------------ > > > > > Dear Marc, > > > > > > > > > > This is Technical support team of Sollae Systems. > > > > > > > > > > Thank you for using our products. > > > > > > > > > > We would like to make sure that when you mention about CSE-M32N, are you referring to CSE-M32 or CSE-M53N? > > > > > > > > > > In case you refer to CSE-M32, there is NO beta firmware that supports AT command to activate or deactivate the SSL. > > > > > > > > > > In case you refer to CSE-M53N, you can get the beta firmware (similar to Q&A 1476) here http://cloud.eztcp.com/201802/CSE-M53N_R20B_07.BIN > > > > > > > > > > Since this is just a beta version, we have not tested it carefully and we cannot guarantee it works as the official firmware. > > > > > > > > > > - To check SSL status: at+pssl? > > > > > - To activate SSL: at+pssl=1 > > > > > - To deactivate SSL: at+pssl=0 > > > > > - To save the setting, you need to send at+pwp command > > > > > > > > > > You can refer to the page 45 of User Manual to see how to upgrade the firmware. https://www.eztcp.com/en/download/pds_files/csem53nen.pdf > > > > > > > > > > For more information about AT Command, please refer to https://www.eztcp.com/en/download/pds_files/an_atc_mode_en.pdf > > > > > > > > > > Please feel free to contact us if you have any inquiry. > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > Marc wrote: > > > > > > ------------------------------------ > > > > > > In Q&A 1476 is said that there exist beta firmware for CSE-M32N implementing the at+pssl at command. But it looks like the link is not available anymore. > > > > > > How could I get this firmware? (I also need the available to switch ssl on and off with an at-command)

Writer	Marc	Company	I-Explore