한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1609 Re: Re: Re: Re: Sales & Support Engineer 2018-10-24

Dear Sir,

I'm afraid that there is an misunderstanding. The CSE-H53 is not directly connected on the MPLS network, there are a lot of routeurs and switches between the two sites.

On a network point of view both end devices are connected on Ethernet network through their TCP/IP stack.

Should the CSE-H53N work in this case ?

Regards,

Christian Doelhoffs


> Sollae Systems wrote:
> ------------------------------------
> Dear Christian Doelhoffs,
>
> We are afraid that CSE-H53N won't work in this case.
> It can not interface directly to MPLS.
>
> CSE-H53N is equipped with standard TCP/IP stack.
> It can be applied in the applications that convert data from serial to Ethernet (TCP/IP) and vice versa.
> So here, to connect CSE-H53N to MPLS network, a gateway that converts between MPLS and TCP/IP is needed.
>
> Thank you very much for your understanding.
> Best Regards
>
>
> > christian Doelhoffs wrote:
> > ------------------------------------
> > Dear Sir,
> >
> > Thank you for your answer.
> > I put in attachment a sketch about this project.
> > As you can see, there is only a one way communication between the central PC and the LED board. Our goal is to load text remotely to the board.
> > We are looking for a device who is able to convert the clear text file containing the text to display send on IP to serial on the remote site.
> >
> > Thank you in advance for your reply.
> >
> > Regards,
> >
> > Christian Doelhoffs
> >
> >
> > > Sollae Systems wrote:
> > > ------------------------------------
> > > Dear Christian Doelhoffs,
> > >
> > > Thank you for being our valued customer.
> > >
> > > A CSE-H53N device is used to convert data from serial to Ethernet (TCP/UDP), and vice versa.
> > > Regarding your inquiry, we would like to ask for more information.
> > >
> > > Could you please let us know more detail about your working scheme and your network topology?
> > > Here, you want to use CSE-H53N device in which part of your scheme?
> > > And how does each component exchange data to others?
> > >
> > > Note that if you want to config parameters of a CSE-H53N device, you need to use ezManager software (only available for Windows O/S).
> > >
> > > Thank you very much.
> > > Best Regards
> > >
> > >
> > > > christian doelhoffs wrote:
> > > > ------------------------------------
> > > > Dear sirs,
> > > >
> > > > A new project require to send data to a RS232 device through a global MPLS IP network (a central site connected to multiple remote sites). We need to configure a remote COM port on a Linux computer.
> > > > We own some devices from your company, model CSE-H53.We are thinking ourself if this device may be work in this configuration.
> > > > If yes, could you tell us how to configure the device and/or computer.
> > > >
> > > > Thank you in advance for your response.
> > > >
> > > > Kind regards,
> > > >
> > > > Christian Doelhoffs

Writer christian Doelhoffs Company Channel Communications