한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1613 Re: Re: Connection with Mitsubishi L-serie 2019-01-03

Good afternoon again,

The state of the problem is,
* Connection of the PC with the CSE-H21 (remote connected)is OK
* Question: Can the USB Cabel from CSE-H21 to PLC L-serie be the problem (serial RS232/USB mini)

Johan Lindeboom


> Sollae Systems wrote:
> ------------------------------------
> Dear Johan Lindeboom,
>
> Thank you for being our valued customer.
>
> As we understand, the connection should be like this:
> PC <-- TCP/IP --> CSE-H21 <-- Serial --> PLC.
>
> To find out whether the problem happens in TCP/IP connection or in Serial connection, we would like to ask for more information.
>
> First, please make sure the serial configuration is set properly between the PLC and CSE-H21 device.
>
> There will be a TCP/IP connection between CSE-H21 and your PC.
> We guess that your working scheme is similar to the one in the attached photo below.
> (You are trying to connect CSE-H21 to the same serial software on your PC that you used to connect to PLC device previously)
>
> In that case, you may need to use ezVSP to connect CSE-H21 and your software on your PC. https://www.eztcp.com/en/download/ezvsp.php
> ezVSP is a virtual serial port driver and TCP/IP socket program, distributed for free by Sollae Systems. (ezVSP User Manual: https://www.eztcp.com/en/download/pds_files/an_ezvsp_en.pdf)
>
> If you still can not find any problem with your setting, could you please send us the screenshot of Serial and TCP/IP setting on your CSE-H21, and also let us know the configuration for the interface in your PC/your PLC with CSE-H21?
>
> Thank you very much for your understanding.
> Best Regards,
>
>
>
> > Johan Lindeboom wrote:
> > ------------------------------------
> > Hello,
> >
> > I have a problem to connect a Mitsubishi PLC, type L02, to a CSE H21.
> > The WAN connection online is ok.
> >
> >
> >
> >
> > Former configuration with a Mitsubishi F-serie gave no problem. The PLC was then coupled using the official progamming cable (RS422)

Writer Johan Company Teunis Industrietechniek