한국어 English Chinese Russian
bannerbar

Q&A



Your information is protected by SSL.
No. 1667 Re: Re: Re: Communication to a CSE-M53N using controllogix PLC 2019-05-15

Dear Joaquin Juarez,

Thank you for your information

I am not clear about your network architecture.

If i am correct, it should be:
PLC <----Serial-----> CSE-M53N <-----TCP/IP-----> PC (----TCP/IP---> ezVSP <----Virtual Serial---> OPC Server )

If so, you need to establish TCP connection between ezVSP and CSE-M53N.
Could you please send us the configuration of TCP connection on ezVSP?

If possible, we can do a remote support via a remote software, which is similar to TeamViewer.
If possible, please contact us via email support@eztcp.com. Our working time is from 9:00AM to 6:00PM (GMT+9)




> Joaquin Juarez wrote:
> ------------------------------------
>
> Hello,
>
> Thank you for your fast response.
>
> My goal is to see if I can communicate directly to the module using a PLC.
>
> -Architecture:
> Network Card 1756-EN2T (Ethernet/IP) connected to the CSE-M53N (Through a switch).
> System does not have a serial port.
>
> -Find the settings in the attached PDF.
>
> -I do not use any PC to transfer the data. I would be looking to do it with the PC.
>
> Now I might be jumping ahead, but in case my approach is wrong, would I need to do something like the following?:
> PLC --> PC (Running OPC Server and ezVSP) --> CSE-M53N
>
> Best regards
> Joaquin Juarez
>
> > Sollae Systems wrote:
> > ------------------------------------
> > Hello Joaquin Juarez,
> >
> > Thank you for using our product.
> >
> > In order to find out the issue, could you please describe detail about:
> > - Your system architecture
> > - Setting of Serial Device
> > - Setting on CSE-M53 (network and serial setting)
> > - Which software do you use on PC to transfer data
> > ?
> >
> > Thank you,
> > Best regards,
> >
> >
> > > Joaquin Juarez wrote:
> > > ------------------------------------
> > > Hello,
> > >
> > > I have a Display that makes use of the CSE-M53N, connected to a local network over ethernet.
> > >
> > > I have not been able to connect the PLC to this communication module. I am wondering if you have any prior example I could use.
> > >
> > > Best Regards

Writer Sollae Systems Company sollae