한국어 English Chinese Russian

Firmware History


Product

CSW-M83, CSW-M85, CSW-H85, CSW-B85 Firmware History

Release Date[Version] Changes
2024-03-05[2.5B] 1. Fixed intermittent Wi-Fi functionality failure bug.
2. Fixed TCP connection delay bug under specific conditions.
3. Fixed some minor bugs.
2020-09-09[2.5A] 1. Resolve the phenomenon of receiving inappropriate deauth packets
2. Improve a logic for checking IP address validation
3. Fix minor bugs
2018-01-29[2.4B] 1. Patch KRACK issue
2. Support a new AT command(ATV2): print IP/PORT when TCP is connected
3. Support the software flow control(Xon/Xoff)
4. Support RFC3168: disable ECN
5. Improve GARP(Gratuitous ARP) mechanism: 4 times > 11 times
6. Fix some minor bugs
2016-03-25[2.4A] 1. Add default password for telnet console.
2. Fix bugs about handling telnet sub-option and password.
2015-12-11[2.3B] 1. Change DNS source port(53 to a random value between 4096 ~ 65535)
2. Improve UI of web configuration
3. Fix a bug about region code
2015-01-16[2.3A] 1. Add control logic for USB dongle (M83 only)
2. Fix bugs about RFC2217, DHCP and SoftAP
3. Improve RFC2217 and DHCP function
4. Support separator function in UDP mode
2013-05-30[2.2B] 1. Support CSW-M83
- Support RT5370/RT5390/RT3572(B/G) chipset
2. Fix a bug about TXDE in RS485
3. Fix a bug about DNS query
2013-03-15[2.2A] 1. Fix a bug about using an invalid IP address
2. Fix a bug about AT command
3. Fix a bug about hidden ssid
4. Improve performance of softap
5. Support sd command in telnet
2012-10-16[2.1C] 1. Support Contry Region setting
2. Add Web configuration
3. Fix a bug about DNS in UDP mode
2012-08-24[2.1B] 1. Soft-AP bug fix
2012-07-27[2.1A] 1. Support WPA-Enterprise (EAP-TLS,TTLS,PEAP)
2. Support IPv6
3. Add Soft AP function
4. Add delimiter function
2012-05-10[2.0A] 1. Improve speed for establishing a Wi-Fi link
- About 14 seconds → 4 seconds (Ver. 1.1A → 2.0A)
2. Simplicity of configuring Wi-Fi security options
- Options such as WPA/WPA2, TKIP/AES and etc. are automatically selected.
3. Improve performance of Ad-hoc network
4. Improve performance of roaming
5. Add advanced configuration for PHY
- PHY mode, Long/Short Preamble, long/Short Slot and CTS Protection
6. Change specification of WLAN mode(802.11b/g/n -> 802.11b/g)
2012-01-11[1.1A] 1. Support H/W Factory Reset function
2. Support RSSI indication by LED
3. Support 63Bytes passphrase for WPA-PSK/WPA2-PSK
4. Support AT commands for Wi-Fi configuration
2011-11-03[1.0D] - CSW-M85 support
- flow-control RTS bug fix
- RS485 support
- at+pwp reset bug fix
- ati3 message bug fix
- add at+prst command
- boot code UART1 hang-up bug fix
- add firmware name in status FIRMWARE VERSION field
- RS422 RTS output high
- remove WPA/WPA2 -> TKIP/AES dependency
2011-07-26[1.0C] 1. TCP# pin bug fix
2. SCFG writing new field allowed
3. SCFG multiple command support
4. SCFG add K(check) command
5. SCFG check code/id/length field of writing frame
6. PPPoE align bug fix at debugging code
7. telnet password mismatch bug fix
8. U2S water mark bug fix
9. telcom RTS/DTR/CTS pin bug fix
10. variable FIFO interrupt interval
11. add product ID M85
12. SCFG corrupted frame bug fix
13. TCP fast retransmit bug fix
14. ATC ESC character bug fix
15. parse DDNS response contents
16. add ddns state field to ezManager status
17. add mac address field to ezManager status
2011-01-03[1.0A] 1. Initial Release