한국어 English Chinese Russian

Firmware History


Product

CSE-M73(A), CSE-H25 Firmware History

Release Date[Version] Changes
2020-04-24[2.2A] 1. Resolve compatibility issues with Intel Ethernet cards
2. Display boot version in Status window
3. Fix minor bugs
2020-01-10[2.1A] 1. Support CSE-M73A
2. Improve a logic for checking IP address validation
3. Improve the Security(Support TLS v1.1/1.2 & remove SSL v2.0/3.0)
4. Add new commands for AT command mode: ATV2
5. Improve GARP function
6. Support RFC3168
7. Fixed minor bugs
2016-03-16[2.0A] 1. Add default password for telnet console.
2. Fix bugs about handling telnet sub-option and password.
2014-12-29[1.7A] 1. Apply new CPU version
2. Fix bugs about DHCP, DNS, SSL and RFC2217
3. Improve RFC2217 function
4. Support separator function in UDP mode
2012-12-05[1.6A] 1. Increase Max multiple session (3ch -> 8ch)
2. Add frame separator function
3. Remove FIFO option
4. Fix some bug about SSL function
5. Fix a bug about using an invalid IP address
6. support MAC ID function at SSL
7. enable RS422/485 interface at SSL
8. support AT+PLS (link status) command
9. add checkip function to DDNS module
10. Fix a bug about DNS in UDP mode
2011-07-26[1.5D] 1. scfg writing new field allowed
2. scfg multiple command support
3. SCFG add K(check) command
4. SCFG check code/id/length field of writing frame
5. PPPoE align bug fix at debugging code
6. add option for disable fifo
7. telnet password mismatch bug fix
8. U2S water mark bug fix
9. RS422/485 slow_tx bug fix
10. SCFG corrupted frame bug fix
11. SSL rxq full bug fix
12. SSL window size bug fix
13. TCP fast retransmit bug fix
14. PPPoE align bug fix
15. UDP zero checksum bug fix
16. ATC ESC character bug fix
17. parse DDNS response contents
18. telnet No Operation command bug fix
19. add AT+PPNG(ping test) command
20. add ddns state field to ezManager status
21. add mac address field to ezManager status
22. CSE-H25 supports DTR/DSR/DCD/RI port
2009-07-23[1.5A] 1. dynamic TCP session management support
2. modified - tcp.c winq.c tty.c iptrap.c lsh.c scfg.c init.c
3. add 'length field' to env write len
4. add lsh sc(session control) command
5. limit tcp mss to MIN(TCP_LOCAL_MSS, ppp_send_mru, ppp_recv_mru)
6. add arp table field to ezManager status
7. DNS peer_ip (ATC mode) bug fix
8. add AT+PSE(send escape) command
9. mac_id support
10. blink status LED after entering scfg mode
11. disable com2 access by sd command
2008-12-11[1.4D] 1. decrease rx idle time to 10bit long
2. IP change missing TCP name bug fix
3. avoid connection to zero IP (0.0.0.0)
4. ata hook bug fix
5. lsh passwd buf overflow bug fix
2008-12-02[1.4C] 1. add atc command PPID & PPPW
2. reload env if crc test is failed when scfg write
3. atcmd auto_ns on/off support
4. blink led (rx/tx) if fatal env fault found
5. emac | reset rx_bds if RX buffer is full
2008-10-16[1.4B] 1. DTR/RTS update on telcom notify
2. atcmd host name lookup support (+pnip,+prhn)
3. TCP no delay support
4. TX delay support (up to 25 character time)
5. drop late dhcp response from coexist dhcp server
6. telcom 0xff bug fix
7. disable dhcp unicast
8. at dial hook bug fix
9. avoid at+pdc/ppe both enabled
2008-07-18[1.4A] 1. TTL output support - H/W fix
2008-06-30[1.3C] 1. IP Change Trap - UDP bug fix
2. SSL/SSH telnet bug fix
3. modify SSL/SSH command lock
4. sio mark/space support
5. duplicate local port bug fix
2008-06-10[1.3B] 1. modify ddns update period
2008-05-29[1.3A] 1. SSL/SSH support
2. disable UDP dest_ip comparison when ezl_local_ip is zero
3. TCP MSS bug fix
4. U2S net_tx, net_rx update bug fix
5. add ICMP frag needed message processing routine
6. optimization option change -O2 to -Os (reduce code size near 10K)
2008-02-05[1.2D] 1. initial release