한국어 홈페이지 English Chinese

PBH-204 / Programmable Device Server

PBH-204 is a programmable device server embedded with a PHPoC interpreter. PBH-204 is equipped with four digital input ports to use it as dry/wet contact and four relay output ports to use it as NO/NC. These input or output ports can be used by your own way to monitor and control connected equipment.

Besides, you can manage data via wired/wireless LAN from a remote site. PBH-204 can be easily implemented to build programmable IoT gateway solution to interact with your existing systems.

Product Specification Videos Download
PBH-204 main features
phpocico  Go to PHPoC.com   >
  • PHPoC interpreter embedded
  • Uploading and debugging codes via USB
  • Ethernet 10Base-T or 100Base-TX (auto-Sensing)
  • IEEE 802.11b/g (USB Wireless LAN adapter required)
  • 4 x digital input port
  • 4 x digital output port
  • 1 x RS232/RS422/RS485
  • Controlling serial equipments via a web page
  • Web page customization available (accessible with smart devices)
  • Industrial temperature range (-40℃~+85℃)



* The above information is subject to change and Sollae Systems is not responsible for any changes.
Digital Input Port
Digital Input Interface4 Input Ports with Photo-coupler Isolation
Dry contact/Wet Contact/NPN/PNP Interface Support
Connector5mm pitch Terminal Block


Digital Output Port
Digital Output Interface4 Output Ports with Relay Out Interface
COM/NO/NC Interface for Each Output
NO (Normal Open) - DC 30V/5A
NC (Normal Close) - AC 125V/3A, AC 250V/2A, DC 30V/1A
Connector5mm pitch Terminal Block


Serial Physical Interface
Serial InterfaceRS232 - RXD, TXD, RTS, CTS, DTR (Always ON), GND
RS422 - TX+, TX-, RX+, RX-, GND with embedded 100K biasing resistors and TVS
RS485 - TRX+, TRX-, GND with embedded 100K biasing resistors and TVS
Connector9 pin D-sub male


Serial Port Properties
Baudrate1,200bps ~ 230,400bps
Data Bits8 bits, 7 bits with parity
ParityNone, Even, Odd, Mark, Space
Stop Bit1, 2
Flow ControlRTS/CTS


Network Interface
Ethernet10Base-T or 100Base-TX (RJ45)
Ethernet Speed Auto Sense
1:1 or Cross-over Cable Auto Sense
Wireless LANRalink RT3070/5370 USB wireless LAN dongle required on the USB A Connector
IEEE802.11b/g
WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise (PEAP, EAP-TTLS, EAP-TLS)


USB Interface
USB A ConnectorRalink RT3070/5370 USB wireless LAN dongle for Wireless LAN
USB B ConnectorFor PC connection to upload/download user PHPoC script


Software Functions
PHPoCPHP compatible interpreter, web server, run-time debugger
ProtocolsTCP, UDP, IP, HTTP, ICMP, DHCP
SecuritySSL (Secure Socket Layer)


Indicators
PowerRed
StatusYellow
DI/DOGreen
User Programmable LEDLED A~H (Yellow)


Supplementary Software
PHPoC DebuggerPHPoC Uploading/Downloading/Editing files, Setting, Upgrading F/W


Dimension
Size180mm x 110mm x 26mm


Power
PWR1DC8.5V ~ DC38V with Polarity Auto Recovery Function
PWR2DC5V ± 5% with Reverse Voltage Protection and Surge Protection
SetupDC5V ± 5% with Reverse Voltage Protection
Power ConsumptionTypically 4.2W (without USB Wireless LAN adapter)


Temperature Condition
Operating Temperature-40℃ ~ +85℃ (without USB Wireless LAN adapter)
Storage Temperature-40℃ ~ +85℃ (without USB Wireless LAN adapter)




Technical Documents
BASIC
1PBH-204 CE certificate
2PBH-204 FCC certificate