HOME  |  KOREAN  |  CHINESE  |  CONTACT US  
ABOUT US | PRODUCTS | APPLICATIONS | SUPPORT | RESEARCH | FAQ | WHERE TO BUY  
 
  Support
 ezTCP's Materials
- Download
- ezConfig
- ezTerm
- Sample Codes
- Library
- ezVSP
 Technical Support
- FAQ
- Q & A
- F/W history
- Latest F/W revision
 ezVSP
- Registration

ezConfig Screen Shot

 

  • [Broadcasting method]

  • [Unicasting method]


    •  
    ezConfig Features

     

  • ezConfig is a utility program, which configures ezTCP equipment settings over wired or wireless LAN.

  • ezConfig has search function and security function.
    Search function show configuration value with found ezTCP that connects with LAN.
    And security function has three steps security system that another person cannot change ezTCP values.

  • ezConfig can communicate with a ezTCP using Broadcasting or Unicasting method.
    1. In Broadcasting mode, coded UDP packets are broadcasted over network to detect ezTCP in the same network segment.
    2. In Broadcasting mode there should be no firewall between the computer running ezConfig and the ezTCP.
    Also, computer and ezTCP should be located in the same subnet since a firewall and/or gateway would block broadcast packets and ezConfig won't be able to detect ezTCP.
    3. In Unicasting mode, the UDP packet is sent directly to ezTCP IP address.
    4. In Unicasting mode, UDP port is set to 50005.
    5. The Unicasting mode is available for the following ezTCPs only:
    LAN type Product Name
    Wired LAN  EZL-50L, EZL-200L, EZL-200F
    Wireless LAN  EZL-300L, EZL-300S
     EZL-80/80c/90/300W Lite(firmware v1.3i or higher)


    •  
    ezConfig Functions

     

  • In Broadcasting mode you can search for all ezTCPs in the network segment. MAC addresses of all found ezTCPs are listed in the [Search List] window.
  • [Search ezTCP] is possible in Broadcasting mode only.
  • In Broadcasting mode, supply the desired MAC address in the input box and click Read.
  • In Unicasting mode, supply the desired IP address in the input box and click Read
  • After you edit ezTCP settings, click [Write] to store the changes you have made.
  • When ezTCP password is enabled, all security features will require password input.
  • You can set security password for your ezTCP equipment.
  • In the [Search List] window select a desired ezTCP and click [Status] to display the current ezTCP status.
  • You can set a username and password for using PPPoE connection.
  • This button becomes available only when the option is selected.
  • This option allows you managing ezTCP using ezConfig.
  • When ezCFG option is disabled, you cannot search and manage ezTCP with ezConfig.


    •